Product Data Sheet

Hochiki Analog-Addressable Sounders
Many systems including Tann Synchronome`s Syncro, Solo and MX-4000 series fire control panels use Hochiki`s ESP Enhanced System Protocol addressable detectors and equipment. ESP is the communication medium between the control panels. This advanced protocol is highly immune to noise and other loop communication problems which leads to high stability and no false alarms due to data corruption. We are able to supply the complete ESP range, many items of which are ex-stock.
Units are individually addressed with a maximum of 127 devices avaliable per loop, depending on the host panel`s drive capability. Detectors and sounders are programmed with the TSASX handheld programmer which removes the need to set DIL switches, providing a quick and reliable solition to addressing. The ASX programmer also has an inbuilt diagnostic facility to display the detector`s analog response.

Key Features · Discreet and stylish design · High output, low power · Compact wall/base sounder · Extra-loud wall horn sounder · Weatherproof version for outdoor use · Base sounders support multiple tones · Base sounders can be used alone with covers · High visibility LED beacon · Beacon can be used alone or with base sounders · LPCB approved

Sounders & Beacons
TSCHQBS Loop Base/Wall Sounder
A compact unit with integral detector mounting base to form a single unit, simplifying installation and reducing cost. Optional covers allow stand-alone use on walls or celings. Seven different pulsed or continuous alarm tones are avaliable which are set via the control panel to signal different conditions if required. Each unit is individually set at its own volume to suit its surroundings, which is also achieved from the control panel.

TSCHQWS Loop Horn Sounder.
High-output electronic horn sounder which produces a sound level of approximately 100dB(A) with a low current consumption of around 7mA. Fully addressable, this stand-alone unit is wired to the detection loop. Fixed alarm tone is compatible with the default TSCHQBS tone. A Weatherproof IP66 version is avaliable for use outdoors or in wet areas.

TSCHQAB Loop Alarm Beacon.
High intensity, low power LED loop beacon. Ideal for use in environments where high ambient noise is present to suppliment audible sounders, and also as a silent staff alarm in public places, music studios, etc. Fully programmable, the unit gives bright attention-getting pulses of light whilst only consuming around 5mA. Available in red, amber and blue, ideal to signal multiple states, eg fire, alert or school class-change. Note, panels sold before April 2004 will require a software or hardware upgrade to support these new devices.

Specifications

Unit	TSCHQBS	TSCHQWS	TSCHQAB
Stand-by Current - Low Power mode	40uA	N/A	N/A
Stand-by Current - Normal	220uA	220 - 250uA	TBA
Operating Temperature	-10 to +50°c	-10 to +50°c	-10 to +50°c
Maxi Humidity (non condensing)	95% RH (at 40°c)	95% RH (at 40°c)	95% RH (at 40°c)
Colour	Ivory White	Red or White	Ivory White with Red lens
Size, d x h (mm, including base)	100 x 68 (with ALG-E)	Standard - 106x106 x 95 Weatherproof - 110 x 110 x 105	100 x 46
Weight (kg)	0.2	Standard - 0.16	0.1

Approved to BSEN54 Part 5 and Part 7.

Order Codes

TSCHQBS	Hochiki Loop Base/Wall Sounder.
TSCHQWS	Hochiki Loop Horn Sounder.
TSCHQWS/W	Hochiki Weatherproof Horn Sounder.
TSCHQAB	Hochiki Red LED Loop Alarm Beacon.

Other Hochiki line equipment is avaliable - please contact us for details.

Back to Sound & Light Devices

Product Price List